License.dat For Matlab 2007b

minialbum Alice

The other day was the birthday of my girlfriend of Tommy, so for her party, I thought I'd give her a mini album where you can finally collect all the beautiful smiles ....

I wanted was something special and personal as a gift every time I do everything with my hands, and then I sat at my "table of wonders" e. .......

Here, a personalized mini album and a note in tune with the rest. Now, if you feel like you explain how I did it:

First I decided what colors to use, then I took the pink A4 Bristol board and I cut in half, making little pages of rectangular. Starting from the left, 3 cm from the edge I proceeded with the cutter to make a folder, then I played the holes equidistant from the edge we will need it later for binding.

At this point I took the card more often from cardboard and I cut two rectangles that were larger than the small page list of at least an inch on each side. From the first, then I got a strip of 3 cm, which will enable me to properly attacked then open the front cover.

In this strip I clearly drilling the holes corresponding to those of small page intena (I suggest you divide the size in half and start with the measurements from the center rather than from the edge, as the cover page and have different sizes !

In the second rectangle that will serve for the back cover, we will do the usual holes but left whole.

With the help of drilling angles Zutter then, go to the right and rounded the corners of both covers, and all the small pages inside.

at this point to hold the cover (pardon the pun), I chose the lilac Rock Paper Moon, and the glue, I covered both the front and back cover, which is outside the the inside, and I proceeded to bring the holes. Important. I forgot to take pictures, but for the front cover, you must join the strip cut, the large panel with masking tape, leaving between the two parties just a millimeter, so that then the cover can be opened easily.

Now you can move on to assembling the cover with small pages inside, passing a satin ribbon in the side holes.

closing with a double knot and a beautiful ribbon bow on the front of the mini album.

Now that the body of the album is done we can move to cover embellishments. I liked that there were a flower little 'chic, and cos' I got a ribbon of organza decorated with flowers, and I removed one hand from the metal core. By pulling the metal core by hand to object, I made sure that the ribbon is wrinkled, I knotted the two ends, and in the middle I have sewn a button to match, then making the switch below the excess wire satin flower ( I will then attach the flower to the cover).

I liked the album was their custom, so I guess you think back, I decided to write the name of little Alice with pink satin. Well, actually it was not the easiest thing in the world, partly because until does not dry the glue you have to maintain the position of the cord. I then plan to use a dressmaker's pins! And here is my work a little painstaking!

Now with the butterfly punch, I cut a sheet of small moths with stripes in shades of pink and I have applied with a drop of glue spread on the front cover, I put a white flower and pink dot as the "I" focusing attention on a fermacampione the shape of a small pink feet.

in the lower left I have two holes drilled in the cover, and by passing the ribbon flower organza done before, and making a knot inside the cover, I've assembled!

And this is the end result .....

Falks That's all my friends .... the next ....

Ilaria